Doctoring Machine

Doctoring rewinding machine
Detailed description ofkmt doctoring / rewinding machine high end model with and without slitting arrangement.
For inject coding / rewinding big to small / correct wound reel / slitting / side trimming etc.
 Working width - 500 mm
- high end doctoring machine with anti – vibration migrated steel material frame.
- dual shaft model with slitting arrangement or you can select single shaft.
- heavy duty structure with 16 mm profile plate.
- machine run on belt drive.
- heavy duty hub on rewind shaft.
- cantiliver unwind type machine.
- mec shaft on rewind and unwind side. ( optional air shaft )
- balancing body. ( one sided open for easy roll feeding & removing)
- s.S 304 made inspection table with bracket ( inject printing table )
- single side mounted 85 mm aluminium ideal roller with balance 35 mm shaft and bearing
- bearing from skf.
- cantiliver unwind frame etc.
- cork roller to maintain tension
- 2 hp motor with isi mark and branded make
- constant line speed drive ( danfoss/ abb/siemence make. Imported.)
- panel consist of emergency switch with speedo meter rpm meter.
- constant line speed drive is specially design for high speed inject priting
- power coated cover for electronic panel which will be attached through machine for easy operation of machine.
- all shafts are hardened and crome plated.
- machine will covered with thick m.S sheet cover.
- material weight on unwind 60 kgs. Rewind 50 kgs. ( depends on client request )

Request
Callback

Additional Information:

• Pay Mode Terms: T/T (Bank Transfer)

We are one of the well-known manufacturers and suppliers of Doctoring Rewinding Machine With Slitting. The offered doctoring rewinding machine with slitting is very commonly used for slitting and rewinding of paper, foil and films. Our supplied doctoring rewinding machine with slitting is capable of removing the rejected material. The offered doctoring rewinding machine with slitting is easy to operate.

Features:

• Optimal rewind diameter
• Circular knife for slitting mechanism
• Long service life

Technical Specifications:

• Web Width : Upto 300 -700 mm
• Unwind Dia : Up to 300 mm
• Rewind Dia : Up to 400 mm Two Stage (or according to party)
• Machine Speed: 200 M PM
• Cutting : Circular & Razor Knife

Request
Callback

Detailed Description Of Doctoring Rewinding For Inject Coding.
Machine Can Be Used For Inject Coding
Kmt Doctoring / Rewinding Machine High End Model
 Working Width - Depends On Requirement Standard Size Is 300-500 Mm
- High End Doctoring Machine With Anti – Vibration Migrated Steel Material Frame .
- Heavy Duty Hub On Rewind Side .
- Cantiliver Shaft Rewind
- Movable Unwind Stand Suitable For Edge Guiding. Web Guiding System Complete With Pneumatic Sensor, Hydraulic Cylinder, And Power Pack Controller Unit Complete With All Standard Accessories .
- Shafting On Unwind With Chuck Nut .
- Balancing Body. ( One Sided Open For Easy Roll Feeding & Removing)
- S.s 304 Made Inspection Table With Bracket ( Inject Printing Table )
- Single Side Mounted 85 Mm Aluminium Ideal Roller With Balance 35 Mm Shaft Bracket
- Cantiliver Unwind
- Seprate Unwind Structure With Edge Guide System
- Cork Roller To Maintain Tension
- Re Italy Tension Control System To Maintain Tension ( Optional Attachment )
Air Shaft ( Extra Attachement )
- 2 Hp Motor With Isi Mark And Branded Make
- Special Drive System Line Speed Drive (abb / Delta / Crompton /lenze ) Or Any Branded Make
- Panel Consist Of Emergency Switch With Speedo Meter .

Request
Callback

Detailed Description Of Doctoring Rewinding For Inject Coding.
Machine Can Be Used For Inject Coding
Kmt Doctoring / Rewinding Machine High End Model
 Working Width - Depends On Requirement Standard Size Is 300-500 Mm
- High End Doctoring Machine With Anti – Vibration Migrated Steel Material Frame .
- Heavy Duty Hub On Rewind Side .
- Cantiliver Shaft Rewind
- Movable Unwind Stand Suitable For Edge Guiding. Web Guiding System Complete With Pneumatic Sensor, Hydraulic Cylinder, And Power Pack Controller Unit Complete With All Standard Accessories .
- Shafting On Unwind With Chuck Nut .
- Balancing Body. ( One Sided Open For Easy Roll Feeding & Removing)
- S.s 304 Made Inspection Table With Bracket ( Inject Printing Table )
- Single Side Mounted 85 Mm Aluminium Ideal Roller With Balance 35 Mm Shaft Bracket
- Cantiliver Unwind
- Seprate Unwind Structure With Edge Guide System
- Cork Roller To Maintain Tension
- Re Italy Tension Control System To Maintain Tension ( Optional Attachment )
Air Shaft ( Extra Attachement )
- 2 Hp Motor With Isi Mark And Branded Make
- Special Drive System Line Speed Drive (abb / Delta / Crompton /lenze ) Or Any Branded Make
- Panel Consist Of Emergency Switch With Speedo Meter .

Request
Callback

We feel proud to introduce ourselves as the well-known manufacturer and supplier of Standard Doctoring Machine. The offered standard doctoring machine is commonly used for rectifying operations, after slitting work. Our supplied standard doctoring machine is made from superior grade raw materials, sourced from very trusted vendors in the market. The offered standard doctoring machine is very cost effective in price.

Features:

• Rugged construct
• Easy to operate
• Durable fabrication

Request
Callback

We are one of the widely acclaimed manufacturers and suppliers of Lever Type Doctoring Machine. The offered lever type doctoring machine is specially designed for correcting the removing the miss-registered materials and correcting the rollers. Our supplied lever type doctoring machine is easy to install and operate.

Features:

• Optimal unwind diameter
• Hard wearing construct
• Longer service life

Technical Specifications:

• Web Width: Upto 300 mm
• Unwind Dia : ‘Up to 300 mm
• Rewind Dia: Up to 400 mm Two Stage (or according to party)
• Machine Speed: 150 MPM
• Cutting: Circular & Razor Knife

Request
Callback

Being a highly effective, lean and fast-moving organization, we are highly instrumental in providing an extensive array of Inspection Doctoring Machine. The offered machine is precisely manufactured using basic components and ultra-modern techniques under the visionary guidance of trained professionals. It is widely used for rectifying printed and unprinted substrate after slitting. We offer this machine to our clients in different technical specifications as per the set industry norms.

Features:

• Easy to operate
• Compact size
• Low maintenance

 

• Unwind Width : 500mm / 1000mm
• Unwind Diameter : 500mm (Maximum)
• Rewind Diameter : 500mm (Maximum)
• Maximum Speed : 150m/min.

Request
Callback

Detailed Description Of Doctoring Rewinding For Inject Coding.
Machine Can Be Used For Inject Coding
Kmt Doctoring / Rewinding Machine High End Model
 Working Width - Depends On Requirement Standard Size Is 300-500 Mm
- High End Doctoring Machine With Anti – Vibration Migrated Steel Material Frame .
- Heavy Duty Hub On Rewind Side .
- Cantiliver Shaft Rewind
- Movable Unwind Stand Suitable For Edge Guiding. Web Guiding System Complete With Pneumatic Sensor, Hydraulic Cylinder, And Power Pack Controller Unit Complete With All Standard Accessories .
- Shafting On Unwind With Chuck Nut .
- Balancing Body. ( One Sided Open For Easy Roll Feeding & Removing)
- S.s 304 Made Inspection Table With Bracket ( Inject Printing Table )
- Single Side Mounted 85 Mm Aluminium Ideal Roller With Balance 35 Mm Shaft Bracket
- Cantiliver Unwind
- Seprate Unwind Structure With Edge Guide System
- Cork Roller To Maintain Tension
- Re Italy Tension Control System To Maintain Tension ( Optional Attachment )
Air Shaft ( Extra Attachement )
- 2 Hp Motor With Isi Mark And Branded Make
- Special Drive System Line Speed Drive (abb / Delta / Crompton /lenze ) Or Any Branded Make
- Panel Consist Of Emergency Switch With Speedo Meter .

Request
Callback

Detailed Description Of Mini Cantilever Doctoring Slitting And Inspection Machine .
Machine Can Be Used For Inject Coding / Inspection / Correct Bad Wound Reels / Rewinder / Slitting / Side Trimming / . Etc .
Kmt Doctoring / Rewinding Machine High End Model
 Working Width - 300-700 Mm
- High End Doctoring Machine With Anti – Vibration Migrated Steel Material Frame .
- Heavy Duty Hub On Rewind Side .
- Cantiliver Shaft Rewind 2 No. ( Air Shaft )
- Movable Unwind Stand Suitable For Edge Guiding. Web Guiding System Complete With Pneumatic Sensor, Hydraulic Cylinder, And Power Pack Controller Unit Complete With All Standard Accessories .
- Air Shaft On Unwind Side ( Optional )
- Balancing Body. ( One Sided Open For Easy Roll Feeding & Removing)
- S.s 304 Made Inspection Table With Bracket ( Inject Printing Table )
- Single Side Mounted 85 Mm Aluminium Ideal Roller With Balance 35 Mm Shaft Bracket
- Cantiliver Unwind
- Seprate Unwind Structure With Edge Guide System
- Cork Roller To Maintain Tension
- Re Italy Tension Control System To Maintain Tension ( Optional )
-
 2 Hp Motor With Isi Mark And Branded Make
- Special Drive System Line Speed Drive (abb / Delta / Crompton /lenze ) Or Any Branded Make
- Panel Consist Of Emergency Switch With Speedo Meter .

Request
Callback

Detailed Description Of
Kmt Doctoring / Rewinding Machine High End Model
For Inject Priting,rewinding Big To Small , Correct Wound Reel , Mini Slitting , Side Trimming Etc
 Working Width 350 / 500 Mm
- High End Doctoring Machine With Anti – Vibration Migrated Steel Material Frame .
- Heavy Duty Hub On Rewind Side .
- Cantiliver Shaft
- Movable Unwind Stand Suitable For Edge Guiding. Web Guiding System Complete With Pneumatic Sensor, Hydraulic Cylinder, And Power Pack Controller Unit Complete With All Standard Accessories .
- 76 Mm Unwind Shaft Suitable For 500 Mm Reel Dia & 76 Mm Core .
- Balancing Body. ( One Sided Open For Easy Roll Feeding & Removing)
- S.s 304 Made Inspection Table With Bracket ( Inject Printing Table )
- Single Side Mounted 85 Mm Aluminium Ideal Roller With Balance 35 Mm Shaft Bracket Cantiliver Unwind Seprate Unwind Structure With Edge Guide Syste Cork Roller To Maintain Tensio Mechanical Brake To Maintain Tension
- 2 Hp Motor With Isi Mark And Branded Make
- Constant Line Speed Drive ( Delta / Crompton /lenze ) Or Any Branded Make
- Emergency Switch With Speedo Meter .
- Constant Line Speed Drive Is Specially Design For High Speed Inject Priting .
Optional Attachment -
Air Shaft , Epc Tension Control System , Slitting Arrangement , Blower .

Request
Callback

Being the most respected organization guided by experienced and knowledgeable professionals, we provide an enormous assortment of Doctoring Machine with slitting . Our offered machine has been specially developed through the R & D efforts at KMT. It is suitable for paper, film & foil conversion Industry. The model is specially designed for correcting badly wound roller to remove the mis-registered and rejected material before it goes to final delivery. Clients can avail this machine from us at market leading price.

Features:

• Easy to install
• Long service life
• Unmatched quality

Canfi Lever Type Doctoring Machine

Technical Specifications:

• Web Width: 300 - 700 mm
• Unwind Dia : ‘Up to 300 mm
• Rewind Dia: Up to 400 mm Two Stage (or according to party)
• Machine Speed: 150 MPM
• Cutting: Circular & Razor Knife

In any paper, film & foil conversion Industry, "Slitting" is invariably the last operation to be performed At the time of slitting, irrespective of the brand and type of slitting machine employed, ten to twelve percent of the output (Le. One out of 10 or 8 slit to size bobbins) is not of sale able quality. This is a Harsh practical fact and the reason there of are quite well known. The model is specially designed for correcting badly wound roller for removing the mis-registered and rejected material before it goes to final delivery, in order to rectify salvage such rejection, the Doctoring machine has been specially developed through the R & D efforts at KMT.

Request
Callback

We are one of the leading manufacturers and suppliers of Doctoring Machine with Rotory Cutter Assembly. The offered doctoring machine with rotory cutter assembly is specially designed for rectifying the printed and unprinted substrate, after slitting. Our supplied doctoring machine with rotory cutter assembly is highly acclaimed for salvaging the worn out parts and components.

Features:

• Removable slitting station
• Mechanical gripper for gripping web
• Circular cutter

Other Details:

• Mechanical Web Gripper & Cross Cutting Slot on Inspection Table
• Removable Slitting Station
• Adjustable Slitting assembly at the running speed
• Individual Drive for both rewind station Synchronize with Nip and slitting Drive
• Speed indicators Mt. / Min, Length Counter I Batch Counter
• Inspection Mounting Facility for Strobe Light, & Video
• Vision. Individual Slip ring for each roll

Technical Specifications:

• Web Width : Up to 500mm
• Unwind Dia : Up to 800mm
• Rewind :Up to 300mm Two Stage (or according to party)
• Machine Speed : 150 MPM
• Cutting Circular & Razor Knife inspection: 300 mm

Optional Attachments:

• Edge Guiding System
• Auto Tension control For unwind
• Auto Tension control for Rewind
• Strobe Scope
• Video Scope
• Ink jet Printer
• On-line Drying System
• Air Shaft for unwind
• Air chucks

Request
Callback