K M Trivedi Engineering Pvt. Ltd.

• Equipped with re-winding shafts
• Constant slitting mechanism
• Corrosion resistant

• Dual shaft
• Drum surface re-winder
• Longer functional life

Other Detail:

• 1200 mm working width “ Center Shaft” Winding machine
• M.S. Plate body structure for unwind main frame & winding
• Movable unwind stand suitable for edge guiding system
• Guiding system complete with Pneumatic-Sensor hydraulic cylinder
• power pack with accessories
• 3 HP AC drive with gear box and controller for floor lifting unwind roll
• 50 mm unwind shaft complete with core cone, check nut and spring suitable for 1000 mm reel dia & 76 mm core.
• Re Italy Tension control for unwind tension control
• Air shaft on unwind and rewind.
• Digital Counter meter with proxy switch
• All Aluminium roller with Balancing.
• Nip roller assembly with drive (1 No. Steel Roller & 1 No. Rubber Roller)
• One full width capacity hard chrome plated steel roller of 150 mm diameter
• One full width capacity rubber roller of 100 mm diameter
• Arm assembly with pressure 100 mm dia with top & bottom self drive circular knife
• Pneumatic system for arm pressure with two cylinder regulator and control drive
• 10 HP Rewind drive for center wind
• Tension Controller ( Included with price )
• Rotary cutter assembly with Shaft Male female Bottom and cutters Alluminium distance piece etc .
• Pneumatic Counter balance system
• Rewind Roll unloading system .
• Plc Touch Screen Operating machine 
• Platform Between unwind and rewind for easy operating.
• All Protection Guards.

• Center surface winding
• Low noise operation
• Durable

Other Detail:

• 1200 mm working width “ Center Shaft” Winding machine
• M.S. Plate body structure for unwind main frame & winding
• Movable unwind stand suitable for edge guiding system
• Guiding system complete with Pneumatic-Sensor hydraulic cylinder
• power pack with accessories
• 3 HP AC drive with gear box and controller for floor lifting unwind roll
• 50 mm unwind shaft complete with core cone, check nut and spring suitable for 1000 mm reel dia & 76 mm core.
• Re Italy Tension control for unwind tension control
• Air shaft on unwind and rewind.
• Digital Counter meter with proxy switch
• All Aluminium roller with Balancing.
• Nip roller assembly with drive (1 No. Steel Roller & 1 No. Rubber Roller)
• One full width capacity hard chrome plated steel roller of 150 mm diameter
• One full width capacity rubber roller of 100 mm diameter
• Arm assembly with pressure 100 mm dia with top & bottom self drive circular knife
• Pneumatic system for arm pressure with two cylinder regulator and control drive
• 10 HP Rewind drive for center wind
• Tension Controller ( Included with price )
• Rotary cutter assembly with Shaft Male female Bottom and cutters Alluminium distance piece etc .
• Pneumatic Counter balance system
• Rewind Roll unloading system .
• Plc Touch Screen Operating machine .
• Platform Between unwind and rewind for easy operating.
• All Protection Guards.

Other Detail:

• 1200 mm working width “ Center Shaft” Winding machine
• M.S. Plate body structure for unwind main frame & winding
• Movable unwind stand suitable for edge guiding system
• Guiding system complete with Pneumatic-Sensor hydraulic cylinder
• power pack with accessories
• 3 HP AC drive with gear box and controller for floor lifting unwind roll
• 50 mm unwind shaft complete with core cone, check nut and spring suitable for 1000 mm reel dia & 76 mm core.
• Re Italy Tension control for unwind tension control
• Air shaft on unwind and rewind.
• Digital Counter meter with proxy switch
• All Aluminium roller with Balancing.
• Nip roller assembly with drive (1 No. Steel Roller & 1 No. Rubber Roller)
• One full width capacity hard chrome plated steel roller of 150 mm diameter
• One full width capacity rubber roller of 100 mm diameter
• Arm assembly with pressure 100 mm dia with top & bottom self drive circular knife
• Pneumatic system for arm pressure with two cylinder regulator and control drive
• 10 HP Rewind drive for center wind
• Tension Controller ( Included with price )
• Rotary cutter assembly with Shaft Male female Bottom and cutters Alluminium distance piece etc .
• Pneumatic Counter balance system
• Rewind Roll unloading system .
• Plc Touch Screen Operating machine .
• Platform Between unwind and rewind for easy operating.
• All Protection Guards.

Unwind Station:

• Automatic Web Guiding System Kmt Make .
• Automatic Brake  Pneumatic Re Italy Make

Rewind Station:

• Type of rewinding Duplex differential. Shaft -1 shaft -2 . ( TURRET RE-WINDER )
• Belt Drive Imported Design
• Two lay on roll.
• Mechanical shaft

Nip Unit:

• With one full width Capacity, hard chrome plated steel roller 150mm
• Dia and one 150mm Dia synthetic rubber roll.
• Belt drive slitting machine
• Machine speed 200 m / m
• 3 Hp motor main drum roller
• Gear box
• Machine plate16mm
• 9 meter roller 5000 to 5500 Re-winding 10 hours
• 32mm,38mm,42mm core use ( ALT Imported Automation On Machine )

Control Panel:

• Variable A.C. Drive With Blower & Power Pack. ( Abb Make ) And Panel Accessories L& T Make

• Rewind tension control
• Grooved slitting system
• Differential winding

• Air shaft for 76mm core. At unwind with Safety chuck Max; Reel weight 1000kg. imported pneumatic tension control with load cell.

• Type of slitting: Razor in groove/circular rotary slitting system. One full width capacity grooved roller
• Trim removal system: 2 HP blower with full width Pipe for trimming along with a trim injector unit Quick and easy system for change over from one Stirring mode to another and from one slit width to another

• One full width capacity hard chrome plated steel roller of 15omm diameter. One full width capacity rubber roller of 150 mm diameter. Pressure is Pneumatically applied from the operation side of the machine

• Type of Rewinding: Duplex Cantilever Differential Winding .with pneumatic pressure to maintain slip edge of rewind roll through digital EIP converter with indicator and Ultra-sonic sensor to maintain rewind dia Quick lock unit for rewinding \ pneumatically controlled lay on roller operator friendly remote control panel provided at rewind for electrical and pneumatic system."

• Circular knife attachment
• P. L.C base single point access& control system. Differential rewind unwind. Servo drive shaft Shaft less Electra mechanical unwind floor lift
• Robotic cutter positioning, Core positioning, Turret rewinder, Inspection table. and Pneumatic Lifter

• Center surface winding
• Low noise operation
• Durable

• Equipped with separate slip assembly for individual slit reels
• Adjustable slipping clutch
• Durable

• Most versatile, model providing combination of duplex center cum surface rewind system
• Constently flawless slit rolls by providing center driver drum to maintain. Fixed minimum distance between slitting and rewind point
• Constant line speed causes constant tension rolls
• Two Rewinding shafts carried on swinging arms are center driven through adjustable slipping clutch
• Counter balance system to adjust the pressure between rewind reels and center drum
• Suitable for off caliper / slippery / stretchy material
• In special case rewinding shaft can be supplied with provision of individua. Different slip assembly for each slit reels
• Slitting methods as per customer requirement like : Scissor cut/crush cut (Circular knives)/ Razor blade slitting system

• Auto tensio control for unwind unit
• KMT Web edge guide system (Hydraulic / Digital ultra sonic)
• Pneumatic system for Arm / Cluch /Brake / Nip
• Air shaft for unwind station
• Digital line edge guide system Safety chucks Bow rollers
• Four motor synchronised drive
• Shaft Less unwinder (optional)
• Pneumatic Lifter
• Air shaft On Rewind

• Unwind Roll
• Auto Tension Control Brake Or Mechanical Brake
• Edge Guide Control Unwind Frame. Structure (movable) Or Fix Unwind Frame
• Pneumatic Or Line Sensor 5.Dancing Roller
• Nip Roller Set 7 Slitting Attachment
• Adjustable Pressure Roll
• Drum Roller
• Rewinding Arm (both Side)
• Clutch Assembly / mechanically / Magnetic For Rewind Tension
• Counter Balance System

Other Detail:

• 1200 mm working width “ Center Shaft” Winding machine
• M.S. Plate body structure for unwind main frame & winding
• Movable unwind stand suitable for edge guiding system
• Guiding system complete with Pneumatic-Sensor hydraulic cylinder
• power pack with accessories
• 3 HP AC drive with gear box and controller for floor lifting unwind roll
• 50 mm unwind shaft complete with core cone, check nut and spring suitable for 1000 mm reel dia & 76 mm core.
• Re Italy Tension control for unwind tension control
• Air shaft on unwind and rewind.
• Digital Counter meter with proxy switch
• All Aluminium roller with Balancing.
• Nip roller assembly with drive (1 No. Steel Roller & 1 No. Rubber Roller)
• One full width capacity hard chrome plated steel roller of 150 mm diameter
• One full width capacity rubber roller of 100 mm diameter
• Arm assembly with pressure 100 mm dia with top & bottom self drive circular knife
• Pneumatic system for arm pressure with two cylinder regulator and control drive
• 10 HP Rewind drive for center wind
• Tension Controller ( Included with price )
• Rotary cutter assembly with Shaft Male female Bottom and cutters Alluminium distance piece etc .
• Pneumatic Counter balance system
• Rewind Roll unloading system .
• Plc Touch Screen Operating machine .
• Platform Between unwind and rewind for easy operating.
• All Protection Guards.

• Counter balance system
• Adjustable slipping clutch
• Surface winder

• Most versatile, model providing combination of duplex center cum surface rewind system
• Constently flawless slit rolls by providing center driver drum to maintain .Fixed minimum distance between slitting and rewind point
• Constant line speed causes constant tension rolls
• Two Rewinding shafts carried on swinging arms are center driven through adjustable slipping clutch
• Counter balance system to adjust the pressure between rewind reels and center drum
• Suitable for off caliper / slippery / stretchy material
• In special case rewinding shaft can be supplied with provision of individua. Different slip assembly for each slit reels
• Slitting methods as per customer requirement like: Scissor cut/crush cut (Circular knives)/ Razor blade slitting system

• Auto tensio control for unwind unit
• KMT Web edge guide system (Hydraulic / Digital ultra sonic)
• Pneumatic system for Arm / Cluch /Brake /Nip
• Air shaft for unwind station
• Digital line edge guide system Safety chucks Bow rollers
• Four motor synchronised drive
• Shaftless Unwinder
• Pneumatic Lifter etc

• Unwind Roll
• Auto Tension Control Brake Or Mechanical Brake
• Edge Guide Control Unwind Frame. Structure (movable) Or Fix Unwind Frame
• Pneumatic Or Line Sensor 5.Dancing Roller
• Nip Roller Set 7 Slitting Attachment
• Adjustable Pressure Roll
• Drum Roller
• Rewinding Arm (both Side)
• Clutch Assembly/mechanically/Magnetic For Rewind Tension
• Counter Balance System

Other Detail:

• 1200 mm working width “ Center Shaft” Winding machine
• M.S. Plate body structure for unwind main frame & winding
• Movable unwind stand suitable for edge guiding system
• Guiding system complete with Pneumatic-Sensor hydraulic cylinder
• power pack with accessories
• 3 HP AC drive with gear box and controller for floor lifting unwind roll
• 50 mm unwind shaft complete with core cone, check nut and spring suitable for 1000 mm reel dia & 76 mm core.
• Re Italy Tension control for unwind tension control
• Air shaft on unwind and rewind.
• Digital Counter meter with proxy switch
• All Aluminium roller with Balancing.
• Nip roller assembly with drive (1 No. Steel Roller & 1 No. Rubber Roller)
• One full width capacity hard chrome plated steel roller of 150 mm diameter
• One full width capacity rubber roller of 100 mm diameter
• Arm assembly with pressure 100 mm dia with top & bottom self drive circular knife
• Pneumatic system for arm pressure with two cylinder regulator and control drive
• 10 HP Rewind drive for center wind
• Tension Controller ( Included with price )
• Rotary cutter assembly with Shaft Male female Bottom and cutters Alluminium distance piece etc .
• Pneumatic Counter balance system
• Rewind Roll unloading system .
• Plc Touch Screen Operating machine 
• Platform Between unwind and rewind for easy operating.
• All Protection Guards.

Key Specifications:

• Low spoilage
• Low requirement to operator’s capability
•  Integrated parameter menu management